Black Diamond HELIO 350 Manuel D'installation page 17

• Move the boot tip towards the toe part, matching the front TECH insert seats with the toe hooking pins
(PICTURE 20). From this position, vertically push on the toe part to step in. (PICTURE 21/22). Rotate a
few times the boot in order to check the proper boot-binding coupling, as shown at PICTURE 22.
PICTURE 20
• Check that the front locking lever is in downhill skiing mode, as shown at PICTURE 23, and that the "SKI"
logo marked on the front lever is completely visible, as shown at PICTURE 23.1; if not like that, slightly
push on the front locking lever in order to obtain the proper position, as shown at PICTURE 23.
PICTURE 23
PICTURE 22
PICTURE 21
PICTURE 23.1
17