Black Diamond HELIO 350 Manuel D'installation page 20

4.5| HOW TO USE THE HELIO SKI CRAMPONS
• The crampons should be fit into or removed from the binding when the boot is not ENGAGED into
the binding. (e.g. with the skis in your hands or skis laying on the snow).
• Crampons must be used only with proper snow conditions; improper snow conditions could lead to
heavy damages to the material and create a greater danger for the user or third parties.
• Do not force the crampon when not properly placed into its seat.
• Original Helio CRAMPONS fit best with your BINDINGS. Other crampons might work too, please
check with your "SPECIALIZED TECHNICIAN".
• Place the crampon at 90° and slip it into the proper seat of the CRAMPONS SLOT, as shown at PICTURE 28.
• Once having correctly placed the crampon in its seat, release the crampon in order to obtain the position
shown at PICTURE 29.
• Manually test the lateral stabilization of the crampon and the free rotation of the same on its pivot, as
shown at PICTURE 29.
• When removing the crampon, place it back at 90° and slide it out (either right or left). A slight rotation
while sliding the crampon out (a few degrees back and forth) would make the sliding operations easier.
PICTURE 28
WARNING! DANGER!
PICTURE 29
20