Editing The Transmitter Parameters; Transferring New Parameters To The Transmitter - JUMO Wtrans p Notice De Mise En Service

The current transmitter parameters are imported to the setup program.
6.4.3

Editing the transmitter parameters

1. In the navigation tree, select the transmitter to be edited by left-clicking it twice.
The "Transmitter configuration" is opened.
2. Edit the desired parameters.
3. Exit the editing procedure with "OK".
4. Save the parameters in the "File" menu with the "Save" function.
6.4.4

Transferring new parameters to the transmitter

1. In the "Data transfer" menu, select the "Data transfer to device" function.
The current parameters are transmitted to the transmitter.
2. End the communication between the setup program and transmitter in the "Data transfer" menu us-
ing the "Disconnect connection" function.
6 Setup program
31