Hardware And Software Requirements; Establishing The Connection Between The Laptop/Pc And Transmitter - JUMO Wtrans p Notice De Mise En Service

6 Setup program
6.2

Hardware and software requirements

The hardware and software requirements can be obtained from the manufacturer's website.
NOTE!
If communication cannot be established with the transmitter or the receiver using the setup program, up-
date the setup program.
The latest setup program can be downloaded from the manufacturer's website.
6.3

Establishing the connection between the laptop/PC and transmitter

The connection between the transmitter and laptop/PC is established using a USB cable, type A USB
connector to a Mini-B USB connector, length 3 m.
CAUTION!
Permanent interface operation!
The USB interface is designed only to configure the pressure transmitter. Continuous operation is not
admissible.
Please ensure that the interface connection is disconnected and the transmitter is correctly closed
once the setup data transfer is completed.
NOTE!
The setup data can also be transferred between the transmitter and the laptop/PC without the transmitter
battery inserted.
28