Complete Overview; Appliance Diagram - CASO DESIGN VC 250 Mode D'emploi


The electrical safety of the unit is only guaranteed if it is connected to a properly installed
protective conductor system. If in doubt, consult a qualified electrician. The manufacturer
cannot be made responsible for damages due to a missing or damaged protective
conductor.

4 Complete Overview

This chapter provides you with an overview of your vacuum sealer and explains some of its
key features.

4.1 Appliance diagram

1. Safety switch: When the cover is open then the heating element will not work
2. Hook for latching of cover
3. Upper gasket
4. Vacuum hose for vacuuming of canisters
5. Sealing bar: Contains a heating wire covered with teflon which allows the bag to seal but
not to stick to the wire. Place the bag over this sealing bar.
6. Button for canisters
7. Release button
8. Sealing profile (presses the bag against the sealing bar)
9. Lower gasket
10. Vacuum chamber
11. Air intake: Connector for vacuum hose for vacuuming of canisters
10