Complete Overview - CASO DESIGN VC 6 Mode D'emploi

15.1 Complete overview

1 air intake connected with the vacuum chamber and pump.
Do not cover this air intake during vacuuming and sealing of a bag.
2 Locking hook
3 sealing profile: which presses the bag against the sealing bar
4 upper gasket
5 cover-release button
6 lower gasket
7 sealing bar and teflon tape: Contains a heating wire covered with Teflon which allows
the bag to seal but not to stick to the strip.
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the teflon tape!
8 Vacuum chamber
www.ducatillon.com
36
Chasse Pêche Loisir et nature Jardin Élevage