Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN VC 250 Mode D'emploi

Please note
► Always unplug the appliance from its outlet immediately after using and before cleaning.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.

6 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining the
device.

6.1 Safety information

Attention
Please observe the following safety notices, before cleaning the unit to avoid damage to
the unit or personal injury:
► Unplug the device prior to cleaning it.
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean the
unit regularly can lead to potential malfunctions, as well as safety and health risks.
► The sealing bar remains hot after use. Wait a few minutes until the strip has cooled before

cleaning.

► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for long
periods can make it very difficult to remove leftover food and grime and may even damage
the unit.
► If moisture penetrates the unit's housing, it can damage the electronic components. Please
ensure that no moisture enters the device.
► Do not use any harsh or abrasive cleaning agents.
► Do not attempt to scrape off stubborn grime with hard or abrasive tools.
► Dry all parts thoroughly before using after cleaning.
► Never immerse the device in water or other liquids and do not place in the dishwasher.
6.2 Cleaning

Outside of the unit
Wipe with a damp cloth or sponge and mild dish soap.

Inside of the unit
Wipe away any food or liquids with a paper towel.
Remove the drip tray and wash with warm water and a mild dishwashing soap. Dry it carefully
and replace it.

Cleaning bags for reuse
Wash the bags in warm water with a mild dishwashing soap, then rinse them well and allow
them to dry completely before reusing.
14