Every time the appliance has been used, clean the string
trimmer with a clean cloth, brush or blow it by compressed
air under low pressure.
Do not use cleaning agents and solvents as they could
damage the plastic parts of the appliance.
Do not spray on the string trimmer.
Winterising
Clean the appliance properly.
Keep the appliance in a dry room.
Provide overall servicing as described in the
Servicing section.
Let the appliance cool down.
Clean the appliance external surface.
Troubleshooting
The table shows potential failures, their possible cause
and removal options. However, if you are unable to
remove the problem, contact a professional to assist you.
Switch off and unplug the appliance before any
servicing and cleaning.
Symptoms
Possible cause
Spool of string is
Appliance not
too short
cutting
Spool is empty
Appliance not
Interrupted power
starting
supply
Remedy
Adjust the spool of
string
Remove the spool
Check the plug, feeder
and extension cable