B 1 . 0 - 10V Bms Without Temperature Monitoring - Jaga DBH SET Manuel

B 1 . 0 - 10V BMS WITHOUT TEMPERATURE MONITORING
Configuration code : DPC.HC5220 / DPC.HC5423 / DPC.HC5523
MODE
ONLY DPC.HC5423 /
DPC.HC5523
Option:
Thermo-electrical motor
B1.1. FACTORY SETTINGS
B1.1.1. Without control panel
The device is controlled via home automation.
The unit starts as soon as there is a 0-10V control signal.
The unit starts as soon as there is a 0-10V control signal.
1 Speed . Activator speed is set according to the unit's length.
B1.1.2. With control pannel
Off The user manually selects the desired mode via the control panel The unit can run at
3 speeds. The unit starts as soon as there is a 0-10V control signal.
The unit start at the last selected speed (1, 2 of 3) if there is a 0-10V control signal. .
Only with configuration code DPC.HC5523!
The unit start at the last selected speed (1, 2 of 3) if there
is a 0-10V control signal. .
The unit starts at the last selected speed (1, 2 of 3),
regardless of the water temperature.
Off
All functions are disabled until the user switches on
the unit via the control panel.
Activator speed is set according to the
unit's length.
1
- HC5220
- DPC.HC5423 / DPC.HC5523
[5]
S3
S2
S1
Min
0 1
curve : Speed versus 0-10V control signal
EN
BMS (V)
10
93