Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
C. TEMPERATUURMODUS
Off
The unit is controlled based on the requested and measured temperature .
Configuration code : DPC.HCA423 / DPC.HCA523
MODE
1
Option:
Thermo-electrical motor
B.5. FACTORY SETTINGS
The unit starts as soon as the control panel is in heating mode, the requested room temperature has
not been reached and the water temperature is > 28 ̊ C .
Only with configuration code DPC.HCA523!
The unit starts as soon as the control panel is in cooling mode, the requested room temperature has
not been reached and the water temperature is < 24°C.
Off
All functions are disabled until the user switches
on the unit via the control panel.
Activator speed in function of the difference
between the set temperature (Tset) and the room
temperature (Tk).
Boost function: The unit runs at maximum speed for
15 minutes.
Control
MODE
Tw < 24ºC
Tset > Tk
100
[A]
Max
Min
Activator speed in function of the difference between the
MODE
Tw > 28ºC
Tset < Tk
Difference Tset-Tk (
0
1
set temperature (Tset) and the room temperature (Tk).
MODE
Off
0°
C)
BMS (V)
10
Publicité
Table des Matières
