Jaga DBH SET Manuel page 92

A2.1.2. With control pannel
The user manually selects the desired mode via the control panel The unit can run at
Off
3 speeds. The unit starts as soon as the set water temperature has been reached.
The unit starts at the last selected speed (1, 2 or 3).
Only with configuration code
The unit starts at the last selected speed (1, 2 of 3), regardless of the water temperature.
Off
All functions are disabled until the user switches on the unit via the control panel.
Activator speed is set according to the unit's length.
Control
MODE
Tw < 24ºC
MODE
Speed 1
Blue LEDs are flashing in the set mode: the water temperature of the supplied water is too high (Tw > 24 ̊ C ).
Red LEDs are flashing in the set mode: the water temperature of the supplied water is too low (Tw < 28 ̊ C ).
A2.2. OPTION : THERMO-ELECTRICAL MOTOR
– Valve opens in heating, cooling and breeze mode
– Valve closed in off mode.
92
- DPC.HC4423 / DPC.HC4523
MODE
MODE
Speed 2
MODE
Tw > 28ºC
MODE
Speed 3
MODE
Off