A. MANUAL MODUS
A 1 . MANUAL
Configuration code : DPC.HC3120 / DPC.HC3423 / DPC.HC3523
MODE
ONLY DPC.HC3423 /
DPC.HC3523
Option:
Thermo-electrical motor
A1.1. FACTORY SETTINGS
A1.1.1. Without control panel
The unit is always on.
The unit is always on.
1 Speed . Activator speed is set according to the unit's length.
A1.1.2. With control pannel
The user manually selects the desired mode via the control panel . The unit can run at 3
Off
speeds.
The unit starts at the last selected speed (1, 2 or 3).
Only with configuration code DPC.HC3523!
The unit starts at the last selected speed (1, 2 or 3).
Off
All functions are disabled until the user switches on the unit via the control panel.
Activator speed is set according to the unit's length.
Control
MODE
90
1
- DPC.HC3120
- DPC.HC3423 / DPC.HC3523
MODE
[3]
Option
MODE
Off