Other Useful Functions - Sigma EF-630 Manuel D'instructions

BRIGHTNESS
Adjust the brightness to the desired level by
BRIGHTNESS
using the
CONTRAST
Adjust the contrast to the desired level by
CONTRAST
using the
When finalizing the adjustment, select [OK] and confirm with
the button.
When cancelling the adjustment, select [CANCEL] and confirm
with the button.
CHANGING THE UNIT OF MEASUREMENT
INDICATION (MENU 4)
The unit of measurement in the Status area can be changed.
[MENU 4] → [M / FEET]
M (Default) Meter indication
FEET Feet indication
FLASH UNIT INFORMATION (MENU 5)
The following information can be checked.
[MENU 5] → [INFORMATION]
MODEL Model name
SERIAL No. Serial number
VERSION Firmware version
buttons.
buttons.
INITIALIZATION OF SETTINGS (MENU 5)
It is possible to reset the flash unit back to factory settings.
[MENU 5] → [RESET SETTINGS]
To initialize the setting, select [OK] and confirm with the
button.
 When the settings are reset, stored custom modes are
deleted.

OTHER USEFUL FUNCTIONS

FLASH HEAD SETTING
When the flash head setting is
used with (Auto), the flash
head is automatically set to the
flash angle that is the optimal to the
lens's focal length.
 The flash head takes into account the size of the camera's
image sensor, therefore the focal length displayed on the
flash may be different to that of the lens.
 Depending on the Flash mode, the flash head setting may
be fixed regardless of the focal length of the lens.
The flash head setting can be changed manually. Press the
buttons in the Mode details area.
24 ⇔ 28 ⇔ 35 ⇔ 50 ⇔ 70 ⇔ 85 ⇔ 105 ⇔ 135 ⇔ 200mm
Depending on the flash head setting, the flash's Guide

Number will change.
29