Storage; Transport; Faults And Repair - Batavia THOR MULTISAW Mode D'emploi

English
You can order spare parts from the After
Sales Support line by providing the follow-
ing information:
• type/model of product;
• item number of product.

9. Storage

Switch the product off and disconnect
1.
it from the mains supply.
Clean the product as described above.
2.
Store the product and its accessories in
3.
a dark, dry, frost-free and well-ventilated
place.
Always store the product in a place that
4.
is not accessible to children. The ideal
storage temperature is between 10 °C
and 30 °C.
We recommend that you store the prod-
5.
uct in its original packaging or cover it
with a suitable cloth to protect it against
dust
Store the product and the accessories
6.
in the transport case (24).
Problem
The product
1.
will not start.
The product
2.
does not reach
its full power.
18
7063051-Thor-Compact-Ma-1804-30.indb 18
Possible cause
The mains plug has not been
inserted in a socket.
The carbon brushes are
worn.
The mains cord is broken.
Other electrical defect on the
product.
Extension cable too long
and/or its cross section is
too low.
The voltage of the mains
supply (e.g. generator) is too
low.
Vents are blocked.

10. Transport

Switch the product off and disconnect
1.
it from the mains supply.
Attach any transport protection devices,
2.
if any.
Always carry the product by the
3.
handles.
Protect the product against impact and
4.
intense vibrations, which occur particu-
larly when transporting in vehicles.
Secure the product against shifting and
5.
tilting.

11. Faults and repair

WARNING!
Only carry out work that is
described in this user manual! Any
other inspection, maintenance or repair
work must be carried out by authorised
After Sales Support or a similarly qualified
professional!
Alleged malfunctions, faults or damage are
often caused by situations that could have
been rectified by the user themselves.
Therefore, check the product before con-
tacting a professional by using the table
below. In most cases, faults can be reme-
died quickly.
Solution
Connect the mains plug with a prop-
erly installed socket.
Have a qualified person replace the
carbon brushes.
Pull the mains cord out of the socket.
Have a qualified person replace it.
Have it checked by a professional.
Use a suitable extension cable.
Connect the product to a suitable
mains supply.
Clean the vents.
04-06-18 11:55