Storage; Transport - Batavia MAXXPACK BT-CCS004 Mode D'emploi

Risk of injury!
Switch the product off, remove the battery
and let the product cool off before carrying
out any inspection, maintenance or cleaning
work!
Always keep the product clean, dry and
1.
free from oil or grease. Remove any
dust after every use and before storing.
Regular and proper cleaning aids
2.
ensure safe use and prolongs the ser-
vice life of the product.
Check the product for worn-out and
3.
defective parts before every use. Do not
use it if you notice any defect or worn-
out parts.
Make sure that no liquids penetrate the
4.
inside of the product.
Clean the product with a dry cloth. Use
5.
a brush for areas that are difficult to
access.
Use a cloth and brush to remove any
6.
dirt and dust from the vents in
particular.
Scrub off any stubborn dust with air
7.
pressure (max. 3 bars).
WARNING!
Risk of damage!
Never use chemical, alkaline, abrasive or
other aggressive cleaning or disinfection
products to clean the product, as these may
damage the surfaces.
Maintenance
– Before and after each use, check the
product and accessories (e.g. fitted
tools) for wear and damage.
– If necessary, replace them with new
ones as described in this user manual.
Observe the technical requirements in
the process (see "Technical data").
Replacing the batteries for laser
If the laser stops working, the batteries
must be replaced.
Loosen the screw and remove the bat-
1.
tery compartment lid from the battery
compartment (19).
Remove the batteries.
2.
Now insert the new batteries. Make
3.
sure the polarity is correct.
Attach the battery compartment lid to
4.
the battery compartment again and
tighten the screw.
Never dispose of old or empty batteries
5.
in your household garbage, instead
always take them to special battery or
special garbage collection points (see
chapter "Disposal").
Repair
There are no parts that can be repaired by
the user inside this product. Contact the
After Sales Support line to check and repair
the product.
Ordering spare parts
WARNING!
Have your product repaired by the
After Sales Support line or a quali-
fied electrician using only identical replace-
ment parts. This will ensure that the safety
of the product is maintained.
You can order spare parts from the After
Sales Support line by providing the follow-
ing information:
• type/model of product;
• item number of product.

8. Storage

Switch the product off and remove the
1.
battery
Clean the product as described above.
2.
Store the product and its accessories in
3.
a dark, dry, frost-free and well-ventilated
place.
Always store the product in a place that
4.
is not accessible to children. The ideal
storage temperature is between 10 °C
and 30 °C.
We recommend that you store the prod-
5.
uct in its original packaging or cover it
with a suitable cloth to protect it against
dust

9. Transport

Switch the product off and remove the
1.
battery.
Attach any transport protection devices,
2.
if any.
Always carry the product by the
3.
handles.
English
19