Operating The Luminaire Using A 4-Channel Wireless Transmitter; Connecting External Receivers; Teach-In Of External Receivers; Displaying The Operating State Of The External Function - Waldmann TALK EnOcean Manuel D'utilisation

ENG
10.3 Operating the luminaire
using a 4-channel wireless
transmitter
Fig. 24: Example: PEHA 4-channel wireless
transmitter.
Switching on
X Press the right-hand key of the wireless
transmitter at the bottom.
Dimming
NOTE: With separately operated lumi-
naires, only the direct light is dimmed.
X To dim the luminaire brighter, press the
right-hand key of the wireless trans-
mitter at the bottom and keep the key
depressed.
X To dim the luminaire darker, press the
right-hand key of the wireless trans-
mitter at the top and keep the key
depressed.
Switching off
X Press the right-hand key of the wireless
transmitter at the top.
Activating the service lighting
X Press the left-hand key of the wireless
transmitter at the bottom.
All connected luminaires will be oper-
ated at the maximum power. The lumi-
naire sensors are off.
The service lighting is deactivated auto-
matically after approximately one hour.
X To deactivate the service lighting pre-
maturely, press the left-hand key of the
wireless transmitter at the top.
50

Connecting external receivers

11. Connecting external
receivers

11.1 Teach-in of external receivers

NOTE: Read in the operating instructions of
the external receiver how to teach in exter-
nal transmitters at the receiver.
Fig. 25: "send" key
X Press the "send" key, see Fig. 25.
A switch telegram will be sent (similarly
to the use of wall transmitters), which
can be used for the teach-in of exter-
nal receivers.
11.2 Displaying the operating
state of the external function
NOTE: As-delivered, the external function
is inactive.
Displaying the operating state of the
external function
Fig. 26: "send" key