Operating The Luminaire Using A 2-Channel Wireless Transmitter - Waldmann TALK EnOcean Manuel D'utilisation

Connecting external transmitters
Deleting all wireless transmitters
Fig. 22: "learn" key
X Press the "learn" key and keep it
depressed for five to ten seconds until
the "learn" LED starts flashing quickly,
see Fig. 22.
All wireless transmitters that had been
saved to the module have now been
deleted.
10.2 Operating the luminaire
using a 2-channel wireless
transmitter
Fig. 23: Example: PEHA 2-channel wireless
transmitter.
Switching on
X Press the key of the wireless transmit-
ter at the bottom.
Dimming
NOTE: With separately operated lumi-
naires, only the direct light is dimmed.
X To dim the luminaire brighter, press the
key of the wireless transmitter at the
bottom and keep the key depressed.
X To dim the luminaire darker, press the
key of the wireless transmitter at the
top and keep the key depressed.
Switching off
X Press the key of the wireless transmit-
ter at the top.
Activating the service lighting
X Rotate the cover of the wireless trans-
mitter once by 180°.
X Press the key of the wireless transmit-
ter at the bottom.
All connected luminaires will be oper-
ated at the maximum power. The lumi-
naire sensors are off.
The service lighting is deactivated auto-
matically after approximately one hour.
X To deactivate the service lighting pre-
maturely, press the key of the wireless
transmitter at the top.
ENG
49