Mounting The Module In An Ataro Free-Standing Luminaire; Mounting The Module In A Tycoon Free-Standing Luminaire - Waldmann TALK EnOcean Manuel D'utilisation

Mounting
5.2 Mounting the module in an
ATARO free-standing lumi-
naire
X Remove the cover in the centre of the
upper side of the luminaire head.
Fig. 3: Module in an ATARO luminaire head.
NOTE: When mounting the module,
ensure correct position of the antenna,
as otherwise the cover on the lumi-
naire head can no longer be mounted
correctly.
X For luminaires with HFMD sensor: Dis-
connect the functional earth in the cen-
tral support of the luminaire head.
X Insert the module A into the unused
area in the central support of the lumi-
naire head, see Fig. 3
X Fasten the module using the deliv-
ered short screws. For luminaires with
HFMD sensor: Use the delivered long
screw on one side of the module to
tighten the module and the line of the
functional earth.
X Mount the cover on the luminaire head.
In doing so, pass the antenna of the
module through the hole in the cover.
5.3 Mounting the module in a
TYCOON free-standing lumi-
naire
X Remove the cover in the centre of the
upper side of the luminaire head.
A
Fig. 4: Module in a TYCOON luminaire
head.
NOTE: When mounting the module,
ensure correct position of the antenna,
as otherwise the cover on the lumi-
naire head can no longer be mounted
correctly.
X Insert the module A into the unused
area in the central support of the lumi-
naire head, see Fig. 4
X Fasten the module using the delivered
short screws.
X Mount the cover on the luminaire head.
In doing so, pass the antenna of the
module through the hole in the cover.
ENG
A
39