Deactivating The Swarm Control; Setting The Work Lighting; Setting The Work Lighting | Via The Light Admin App; Setting The Work Lighting | On The Module - Waldmann TALK EnOcean Manuel D'utilisation

ENG
7.4 Deactivating the swarm con-
trol
Fig. 18: Swarm control deactivated.
X Push the "mode" slide switch to posi-
tion 0, see Fig. 18, and make sure that
at least one rotary coding switch is not
at position 0, for example at position 1.
The function is deactivated. All other
functions such as communication with
external transmitters and receivers
remain active.
46
8.

Setting the work lighting

8.1 Setting the work lighting | Via
the LIGHT ADMIN app
X Set the work lighting via the LIGHT
ADMIN app
8.2 Setting the work lighting | On
the module
Setting the work lighting of an ATARO,
LAVIGO or LAVIGO VTL luminaire
X Dim the luminaire until the work area
is illuminated with the required bright-
ness. For more details on this, please
read the instructions for use of the
luminaire.
The set brightness is saved as work
lighting.
Setting the work lighting of a TYCOON
luminaire
X Dim the luminaire by pressing the upper
key of the operating element of the
luminaire until the work area is illumi-
nated with the desired brightness. For
more details on this, please read the
instructions for use of the luminaire.
The set brightness is saved as work
lighting.
Setting the work lighting