Lighting Levels; External Transmitters; External Receivers; Repeater Function - Waldmann TALK EnOcean Manuel D'utilisation

ENG
3.2

Lighting levels

The lighting levels are already preset to opti-
mum values as-delivered. If required, you
can adjust the work lighting and the back-
ground lighting to your needs.
Work lighting
0 %
Individually adjustable lighting level, in
which a luminaire emits a quantity of light
that allows pleasant working in the area of
the luminaire.
Background lighting
0 %
Reduced lighting level, in which a luminaire
emits a smaller light quantity.
As-delivered, the luminaire has a maximum
power consumption in background lighting
of approx. 30%, relative to the maximum
power consumption of the luminaire.
Service lighting
0 %
Lighting level, in which all connected lumi-
naires are operated at full power. The lumi-
naire sensors are off.
The service lighting is activated via external
transmitters and deactivated automatically
after approximately one hour.
3.3

External transmitters

This function can be used for teach-in of
external EnOcean transmitters, such as
wall transmitters. This enables external
transmitters to operate the module and
the luminaires connected to it.
36
3.4
This function can be used for teach-in
of external EnOcean receivers, such as
switching receivers or gateways for build-
ing automation. This enables external
receivers to receive switching information
of the luminaire via the module.
3.5
This function allows the module to be used
100 %
as repeater.
100 %
100 %

External receivers

Repeater function

Functions