Waldmann TALK EnOcean Manuel D'utilisation page 43

Configuring the swarm control
area
7/7 7/8
group adr. = 7
group adr. = 8
area adr. = 15
Fig. 11: Example: Groups
Within an area, each luminaire can be
assigned to exactly one group or to two
different groups.
The groups can be set either via the LIGHT
ADMIN app or via the two "group 1" and
"group 2" rotary coding switches. Each
rotary coding switch is for a group. 16 group
addresses (0-F) can be set. Up to 30 lumi-
naires can be assigned to each group.
0
1
group
0
2
8/9 9/9
group adr. = 9
group adr. = 7
Fig. 12: Example: luminaires do not detect pres-
ence.
If no luminaire of an area or of a group
detects presence, all luminaires will remain
switched off, see Fig. 12
group adr. = 7
Fig. 13: Example: Group 7 luminaire detects
presence.
When a person enters the detection area
of a luminaire that belongs to a group, this
luminaire is switched to work lighting.
The luminaire that is present in the same
group but does not detect presence is
switched to background lighting, see Fig. 13
ENG
group adr. = 8
area adr. = 15
group adr. = 8
area adr. = 15
43