Connecting External Transmitters; Teaching In And Unteaching Wireless Transmitters - Waldmann TALK EnOcean Manuel D'utilisation

ENG
The luminaire switches again to work
lighting, which can again be set as
desired.
Setting the background lighting of a syn-
chronously operated TYCOON luminaire
X Dim the luminaire by pressing the lower
key of the operating element of the
luminaire until the work area is illumi-
nated with the desired brightness. For
more details on this, please read the
instructions for use of the luminaire.
The set brightness is saved as back-
ground lighting.
X To return to work lighting, press the
upper key of the operating element of
the luminaire.
48

Connecting external transmitters

10. Connecting external
transmitters
10.1 Teaching in and unteaching
wireless transmitters
A luminaire can communicate with a maxi-
mum of ten wireless transmitters.
Teaching in and unteaching a wireless
transmitter
Fig. 21: "learn" key
X Press the "learn" key and keep it
depressed for two seconds, see Fig. 21.
The "learn" LED is flashing.
X Press the desired wireless transmitter.
The "learn" LED goes out.
Teach-in of the wireless transmitter
is complete. If the wireless transmit-
ter was already taught in, the wireless
transmitter is now untaught.
X If you want to teach in further wireless
transmitters, repeat the process.