Installing The Module - Waldmann TALK EnOcean Manuel D'utilisation

Installing the module

4. Installing the module
In this chapter, you will learn which possibilities you have for using and configuring the
module.
1st step: Configuring the swarm control
If you want to configure the swarm control according to your needs, you have two
possibilities:
X Configure the swarm control via the LIGHT ADMIN app, see chapter 7 .2 "Con-
figuring the swarm control | Via the LIGHT ADMIN app" , page 44.
or
X Configure the swarm control directly on the module, see chapter 7 .3 "Configur-
ing the swarm control | On the module" , page 45.
2nd step: Checking the setting for external receivers
X If you want to connect external EnOcean receivers to the module at a later
stage: Check whether you want to change the DIP switch setting on the back
of the module prior to mounting, see chapter 11.4 "Setting the external func-
tion" , page 51
3rd step: Mounting the module
X Mount the module, see chapter 5 "Mounting" , page 38
4th step: Connecting the module
X Connect the module, see chapter 6 "Connection" , page 40
ENG
37