Tools Required - R&G LP0197BK Instructions De Montage

LP0197
LEGEND
ITEM 1 = M6 x 16mm LONG BUTTON HEAD BOLTS (x4)
ITEM 2 = M6 WASHERS (x8)
Page | 2
ITEM 3 = SUB-FRAME (FOR ILLUSTRATION ONLY)
ITEM 4 = LICENCE PLATE BRACKET (TB0197BK) (x1)
ITEM 5 = M3 NUTS (x2).
ITEM 6 = M3 WASHERS (x2).
ITEM 7 = RUBBER GROMMET FOR KEY LOCK COVER (RB0004) (x1).
ITEM 8 = RUBBER GROMMET FOR TAIL LIGHT WIRING (RB0002) (x1).
ITEM 9 = O-RING FOR RUBBER GROMMETS (OR0006) (x2).
ITEM 10 = M6 NYLOC NUTS (x4)
ITEM 11 = TAIL LIGHT SHROUD (LA0003 SHROUD) (x1)
ITEM 12 = TAIL LIGHT ASSEMBLY (LA0003) (x1)
ITEM 13 = OEM INDICATOR ADAPTERS (I0037) (x2)
ITEM 14 = MINI INDICATOR ADAPTERS (I0016) (x4)
ITEM 15 = 180mm HEAT SHRINK TUBE (x3)
ITEM 16 = BULLET CONNECTORS (CON0004) (x4 pair)
ITEM 17 = SMALL CABLE TIES (x3)
ITEM 18 = REFLECTOR (x1)
ITEM 19 = TAIL LIGHT RESISTOR (CON0048) (x1)
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Set of metric Allen keys

8mm and10mm Socket and wrench.

Phillips driver.
1 2
PICTURE PICTURE
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com
2