Match The Collar Receiver And Remote Transmitter - SportDOG SportTrainer 575 Guide De Démarrage Rapide

STEP::04

MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER

The Remote Transmitter has been pre-configured to work with the Collar Receiver. However, if you need to match
the Collar Receiver to work with a new Remote Transmitter, or to match a new Collar Receiver to work with your
existing Remote Transmitter, follow these steps:
1. Turn the Collar Receiver off.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on and then turn off after 5 seconds.
NOTE: If the Receiver Indicator Light begins flashing, start over from Step 1.
3. Release the On/Off Button.
4. Press and hold one of the Side Buttons on the Remote Transmitter until the Receiver Indicator Light
flashes 5 times.
5. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been matched and will begin
flashing as normal. If the Receiver Indicator Light does not flash, repeat this procedure.
8
SPORTDOG.COM