Connecting The Power Cord; Attaching The Hose And Accessory Tools - Tennant 3090 Opérateur Manuel Et Liste Des Piéces

CONNECTING THE POWER CORD

The machine comes equipped with 15M (49ft)
detachable power supply cord.
To connect the power cord to the machine, slide the
the machine's cord retaining clip down and upward to
expose the cord receptacle. Plug the power cord into
the receptacle and secure the cord by replacing the
retainer clip (Figure 7).
FIG. 7
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug Power
Cord Before Servicing Machine

ATTACHING THE HOSE AND ACCESSORY TOOLS

The machine comes equipped with a 1.2M (4ft)
vacuum hose, Upholstery tool, Crevice Tool and
Dusting Tool, Telescopic Wand and Floor Tool.
1. To attach the vacuum hose to the machine, simply
insert the vacuum hose into the swivel elbow until
it snaps into position. To disconnect the hose from
the elbow, press the hose release button located
on the elbow (Figure 8).
FIG. 8
Tennant 3090 (05- -02)
Home Home
2. Select desired accessory tool and attach it to the
3. Floor Wand Attachment. Push the release button
4. Store the remaining accessory attachment tools
Find... Go To.. Find... Go To..
vacuum hose nozzle (Figure 9).
FIG. 9
on the telescopic wand to extend the length of the
wand (Figure 10)
FIG. 10
on the waistbelt and in the waistbelt pouch as
shown (Figure 11).
FIG. 11
OPERATION
13