NSK Ti-Max X-SG20L Mode D'emploi page 28

8-6 Lubrication
NSK PANA SPRAY Plus / PANA SPRAY
Apply NSK PANA SPRAY Plus / PANA SPRAY every time after each use and/or before
autoclaving.
1) Attach the Spray Nozzle into the Spray Port nozzle on the can.
2) Insert the Spray Nozzle into the rear of the handpiece. Hold the handpiece and spray
2-3 times for approximately 2-3 seconds each time. Apply lubricant until it expels from
the handpiece head for at least 2 seconds (Fig. 15).
26
Fig. 15