NSK Ti-Max X-SG20L Mode D'emploi page 29

CAUTION
Hold the spray can upright.
Be sure to hold the handpiece firmly to prevent slipping out of hand by the spray pressure when lubricating.
Supply lubricant until it comes out of the handpiece head.
If you wish to expel excessive oil from inside of the handpiece, rotate the handpiece for approx.15 seconds without a bur.
During the rotation, do not depress the push button inadvertently, especially when using absorbent cloth to prevent oil from
scattering. Depressing the push button during rotation may cause a failure to attach a bur/drill.
Fig. 16 Fig. 17
27