NSK Ti-Max X-SG20L Mode D'emploi page 31

8-7 Sterilization
Sterilize the product by autoclave sterilization. After each patient sterilize as noted below.
The following items can be autoclaved: Handpiece, Internal Spray Nozzle, Nozzle Holder
1) Insert into an autoclave pouch. Seal the pouch.
2) Autoclavable under the conditions below.
Exposure at 132°C for more than 15min.. Drying for more than 30 min.
3) The handpiece should remain in the autoclave pouch until required for use.
29