Cutting Attachment - Stihl MS 150 C Notice D'emploi

English
Cut through the holding wood at an
N
angle from above with arms fully
extended
18
All manuals and user guides at all-guides.com

Cutting Attachment

A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the chain saw.
1
a
The pitch (t) of the saw chain (1),
–
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
The drive link gauge (2) of the saw
–
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
Chain Scabbard
2
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
3
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
MS 150 C