Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note: The weather station measures the absolute air pressure. Your local weather service can supply you with the
All manuals and user guides at all-guides.com
relative air pressure for your location, which you can input into the weather station.
To change the relative air pressure, press and hold the Relative/Absolute-button 30 for 3 seconds. The air pressure
value will blink on the display and can be set by pressing the °C/°F + -button 28 or MAX/MIN-button 29. Confirm
your setting by pressing the Relative/Absolute-button 30.
Select the air pressure unit Hectopascal (hPa) or Inches of mercury (inHg) by pressing and holding the °C/°F + -button
28 for 3 seconds.
12-hour air pressure history
Press the HISTORY/WEATHER-button 27 to view the air pressure history for the last 12 hours.
0 – HR = current air pressure
- 1 HR = air pressure 1 hour ago
-2 HR = air pressure 2 hours ago... and so on
Outdoor sensor/channel setting
You can use the weather station with up to 3 outdoor sensors at the same time. Open the battery compartment of the
outdoor sensor and select a channel (1-3) by using the channel switch 39. Press and hold the CHANNEL-button 26 for
3 seconds or until an audible signal sounds. The weather station will now attempt to receive the signal 43. Close the
battery compartment. Press the °C/°F-button 41 to select °C-Celsius or °F-Fahrenheit.
Note: The outdoor sensor must be within a maximum distance of 100 m of the weather station with no obstructions.
If you are using mutliple outdoor sensors: Press the CHANNEL-button 26 to select the reception channel.
The rotation symbol
on the display at 22 indicates that the weather station is rotating through channels 1-3.
Only active outdoor sensors are displayed. Press and hold the CHANNEL-button 26 to remove unused channels.
When adding an additional outdoor sensor, the weather station will detect it automatically.
Outdoor temperature tendency
The temperature trend 21 is displayed upon successful reception from the outdoor sensor.
Outdoor temperature rising
Outdoor temperature constant
Outdoor temperature falling
Indoor humidity
The current indoor humidity is shown on the display at 5. The comfort icon 4 can show 3 levels of comfort:
< 40 %
DRY
< 20 °C
20 – 26°C
> 26 °C
Maximum and minimum values
The maximum and minimum temperature and humidity are stored as soon as the batteries are inserted.
Briefly press the Max/Min- -button 29 to display the maximum MAX, minimum MIN and current indoor temperature 3,
outdoor temperature 24 and humidity 5 on the display. To delete the maximum and minimum values, press and hold
the Max/Min- -button 29 for 3 seconds. An audible signal will sound and the stored values will be deleted. The
weather station will immediately restart recording of the values.
Battery level indicator
If the batteries run too low to power the weather station, the outdoor sensor and signal transmission, the battery level
indicator 23 will appear on the display. Replace the batteries in all devices as soon as possible. Restart the weather
station.
Restart (RESET)
Press the RESET-button 33 to reset the weather station.
40 – 60 %
> 60 %
COMFORT
HUMID
/
/
- 39 -
Publicité
Table des Matières
