Select The Video Input To Be Projected; Adjust The Screen Size - JVC DLA-M5000LE Manuel D'instructions

I Projector's buttons
AV button
TEMP
LAMP EMERGENCY AV
RGB button
I Remote control unit
LENS LOCK j UNLOCK switch
QUICK
ALIGN.
OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
ATTENTIONS
• DO NOT give any shock to this projector while
operating it; otherwise, the light-source lamp goes off
(the EMERGENCY indicator lights up).
If the shock turns off the light-source lamp —
Turn off the power by pressing the MAIN POWER
switch, then turn it on again. Then, when the STAND
BY indicator comes on, you can now operate the
projector as usual.
RGB SETTING QUICK
ALIGN.
AV button
RGB button
ZOOM (T/W) buttons

2. Select the video input to be projected

I Press the AV button or the RGB button to
switch the input.
• Each time you press either button, the selected input
changes as follows.
When you press VIDEO:
Y/C VIDEO
When you press COMPUTER:
RGB 1
Screen display
YPBPR
* When the input is switched, the line display and the
source display are shown on the upper part of the
screen (they disappear in about five seconds). However,
they will not be shown if LINE DISPLAY in "Setting and
Adjusting Other Functions (OPTIONS)" on page 40 is
set to OFF.
(For setting the source, see page 43.)

3. Adjust the screen size

I Adjust the screen size with the remote
control's ZOOM (T/W) buttons.
When adjusting the screen size with the ZOOM buttons,
set the LENS LOCK j UNLOCK switch to the UNLOCK
position.
To enlarge the screen size:
Press the ZOOM (W) button.
To reduce the screen size:
Press the ZOOM (T) button.
Remote control unit
T
ZOOM
W
Notes
• The adjustment of the screen size (zoom adjustment) can
also be made on the setting menu.
For operating the setting menu, refer to "Making Basic
Settings" on page 29.
• When a fixed-focus lens is used, you cannot operate the
setting menu.
Basic Operations
YPBPR
RGB 2
CH: 1
HDTV(1080i)
25