Remote Control Unit - JVC DLA-M5000LE Manuel D'instructions

Controls and Features

Remote Control Unit

1 Remote control's signal transmitter
2 OPERATE button
To turn on or off the power, press this button for one or
more seconds.
* About 30 seconds after the power has turned on, video
image will appear on the screen.
3 PAGE BACK button
While no menu is displayed, pressing this button causes a
direct channel to be displayed.
Memo
Direct channel display:
A direct channel display allows you to switch between
channels which have lines and sources registered. For
details, refer to "Switching channels using a DIRECT
CHANNEL" (page 51).
4 MENU/ENTER button
Use this button to display the main menu, or while the
main menu is displayed, use the button to select an item
to adjust or make adjustment. While the main menu is
displayed, pressing MENU/ENTER displays a details
setting (submenu) if the selected item has a details
setting.
For how to operate the buttons, see page 12.
5 RGB/COMPUTER button
Use this button to select the devices connected to the
projector's RGB IN (RGB input) -1 and -2 input terminals.
Each time you press the button, the selection changes as
follows:
RGB 1
10
QUICK
ALIGN.
AV HIDE
PRESET
AV
U
SHIFT ZOOM
D W
LENS
7
6 FOCUS (+/–) button
Use these buttons to adjust the focus of the projected
picture.
+: The focus point becomes more distant.
–: The focus point becomes nearer.
7 REMOTE terminal
Use a remote control cable to connect between the
projector and the remote control. For details, refer to
"Connecting to Devices which Control the Projector" on
page 21.
8 ZOOM (T/W) button
Use these buttons to increase or decrease the screen
size. (They can only be used when a zoom lens is used.)
T: The screen size decreases.
W: The screen size increases.
9 SHIFT (U/D) button
Use these buttons to adjust the height of the projection
screen when projectors are used in a stack configuration.
U: Moves the screen upwards.
D: Moves the screen downwards.
RGB 2
OPERATE
PAGE BACK
RGB/COMPUTER
+
T
FOCUS
–