Select The Video Input To Be Projected; Adjust The Screen Size - JVC D-ILA DLA-L20U Manuel D'instructions

Basic Operations (Cont.)
Projector's buttons
STAND BY
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING
+
3
QUICK
ALIGN.
- 2
Remote control unit
OPERATE
COMPUTER VIDEO
T
VOL.
ZOOM FOCUS
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK AV
ALIGN. MUTING
ATTENTIONS
• DO NOT give any shock to this projector while
operating it; otherwise, the light-source lamp goes off
(the EMERGENCY indicator lights up).
If the shock turns off the light-source lamp —
Turn off the power by pressing the MAIN POWER
switch, then turn it on again. Now you can operate
the projector as usual.
VIDEO button
COMPUTER button
COMPUTER button
VIDEO button
ZOOM (T/W) buttons

2. Select the Video Input to be Projected

Press the VIDEO button or the COMPUTER button to
switch the input.
• Each time you press either button, the selected input changes as
follows.
When you press VIDEO:
Y/C
When you press COMPUTER:
COMP 1
Remote control unit
COMPUTER VIDEO
Screen display
Line display
Y P B P R
* When the input is switched, the line display (ex. Y,PB,PR) and
the source display (ex. NTSC(480i)) are shown on the upper
part of the screen (they disappear in about five seconds).
However, they will not be shown if LINE DISPLAY in "Setting
and Adjusting Other Functions (OPTIONS)" on page 44 is set
to OFF. (For setting the source, see page 47.)
Also, when a channel is set, the channel display is shown on
the upper right corner of the screen. (For setting up channels,
see page 31,49 and 54.)
Note
• To select the proper audio input for video input
The video input terminal (AV IN input terminal) can be switched with the
VIDEO button. However, since this projector has only a single audio input
terminal, reconnect audio input in accordance with the AV device to be used.

3. Adjust the Screen Size

Adjust the screen size with the remote control's ZOOM
(T/W) buttons.
To enlarge the screen size:
Press the ZOOM (W) button.
To reduce the screen size:
Press the ZOOM (T) button.
Remote control unit
T
ZOOM
W
Note
• The adjustment of the screen size (zoom adjustment) can also be made on
the setting menu.
For operating the setting menu, refer to "Making Basic Settings" on page 32.
VIDEO YPBPR
COMP 2
Projector
VIDEO
COMPUTER
Channel display
C H : 1
N T S C ( 4 8 0 i )
Source
display
27