Operating The Main Menu (Basic Operation Of The Main Menu) - JVC DLA-M5000LE Manuel D'instructions

Operating the Main Menu

Operating the Main Menu (Basic Operation of the Main Menu)

I Remote control unit
QUICK
ALIGN.
OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
I Main menu
Submenu items
Input line
Y P B P R
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Decoder (color system)
32
PAGE BACK button
MENU/ENTER button
Channel
Source
C H : 1
H D T V ( 1 0 8 0 i )
N T S C ( 4 8 0 i )
E N G L I S H
Language
For projector's menus, the setting menu and the main menu
are available.
Here, we explain about the operation of the main menu.
For the setting menu, refer to "Making Basic Settings" on
page 29.
1
Press the MENU/ENTER button.
• The main menu is displayed on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select an item.
• The selected item (displayed text) is shown in magenta
color on the screen.
3
Set (adjust) the item.
When you have selected DECODER or
language,
• Press MENU/ENTER toward the 2 or 3 mark to set.
* To finish the main menu, press the PAGE BACK button.
When you have selected an item on the
submenu,
• Press MENU/ENTER to display the submenu. Then,
set (adjust) the item by pressing MENU/ENTER toward
the 2/3 or 5/∞ mark.
* To return to the main menu, press PAGE BACK again.
To finish the main menu, press PAGE BACK again. (To
finish the main menu from the submenu, press PAGE
BACK twice.)
I About main menu display:
Line display: The selected input-mode designation is
displayed. For input-mode designation, "Y/C",
"VIDEO", "YPBPR", "RGB 1" and "RGB 2" are
available.
Source display: The type of signal being input is displayed.
With this projector, unique designations are
previously given to specific horizontal and
vertical frequencies. This allows the source
selected under SOURCE (submenu item) to
be indicated. The source setting can be
selected from AUTO mode, dedicated (forced)
modes and USER mode. When AUTO is
selected, the horizontal and vertical
frequencies of a signal being input are
detected and the matched designation is
displayed in ( ).
Therefore, be careful as the source display
does not always correspond to the indication
or type of the input signal.
For the unique designations for the specific
horizontal and vertical frequencies, see
page 18.
Channel display: The channel selected by the user is displayed.
The line and sources selected by the user
have been registered to the channel. Once
registered, the line and sources of the
projector will change to the ones the user has
registered only by switching between
channels. The settings should be made on the
"Channel setup/selection menu". For details,
see page 46.
Submenu item See pages 35 to 57.
display:
Decoder (Color See page 33.
system) display:
Language display:See page 34.