Examples Of System Configuration - JVC DLA-M5000LE Manuel D'instructions

Examples of System Configuration

Before connection, be sure to turn off both the projector and the equipment to be connected.
• Also, read the manuals which came with the equipment.
Example of a basic system
• By connecting an RGB switcher, a variety of input sources can be input to the projector as RGB signals. Using the
remote control supplied, you can select the channel for an input source and project an image optimal to the source.
HDTV 1
HDTV 2
Computer 1
Computer 2
Note
• Video image displayed on devices whose image signal is unstable, such as a video deck, may be disturbed. (This can occur
when the projectors is not yet adjusted at the time of installation, or when a new device is added.)
In such a case, ask the dealer where you purchased the projector or a local service center to adjust the projector.
It is recommended that you use a video deck that is equipped with an image signal correction function (such as time base
corrector or frame synchronizer).
RGB switcher
Connecting to Various Devices
Projector
Y/C VIDEO
RGB RGB IN-1
R RGB IN-2 EXT. IN Y
G H/C S P /B-Y B
B V P /R-Y R
REMOTE
RGB OUT CONTROL
RS-232C
19