Setting Up Channels - JVC DLA-M5000LE Manuel D'instructions

Operating the Main Menu

Setting Up Channels

I Remote control unit
QUICK
ALIGN.
OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
I Main menu
Y P B P R
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Submenu item [CHANNEL]
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency,
etc.) for computer signals, see page 18.
46
PAGE BACK button
MENU/ENTER button
C H : 1
H D T V ( 1 0 8 0 i )
N T S C ( 4 8 0 i )
E N G L I S H
When you set up channels, you can select a line and a
multiple of sources (up to 30) for each channel. If you are
using a switcher and set switcher numbers, you can also
select each channel from the switcher side.
Memo
• With multiple sources having been set on channels, when a
channel is selected, incoming signal is automatically
checked and switched to one of the sources registered on
the channel.
If a matching source is not found among the registered
sources, the most approximate source of the sources
registered will be selected.
1
Press the MENU/ENTER button.
• The main menu appears on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select a submenu item,
"CHANNEL".
• The selected item (text display) is shown in magenta
color.
3
Press the MENU/ENTER button to set.
• A submenu item, "CHANNEL setup/selection menu",
appears on the screen.
• If no "LINE", "SOURCE" or "SW No" item is registered,
unregistered characters (I) are displayed on the
screen.
C H A N N E L
( A U T O )
CH L I N E
1
Y / C
2
V I D E O
3
4
5
6
7
8
9
10
(CHANNEL setup menu)
4 Press MENU/ENTER toward the 5 or ∞
mark to select the channel (CH) whose
contents you want to change.
• The selected CH is shown in magenta color.
5 Press MENU/ENTER toward the 2 or 3
mark to select the item to set (LINE,
SOURCE or SW No).
• The selected item is shown in magenta color.
• Unregistered channel items (LINE, SOURCE or SW
No) can also be selected. However, "LINE" and
"SOURCE" need to be already set.
6
Press MENU/ENTER to set.
• Channel items LINE, SOURCE and SW No) for the
"CH" selected on the "CHANNEL setup • selection"
menu are set.
• For how to set each item, see pages 47 to 50.
SWNo
S O U R C E
1
N T S C ( 4 8 0 i )
2
P A L / S E C A M