Changing The Color System - JVC D-ILA DLA-S15U Manuel D'instructions

Operating the Main Menu (Cont.)

Changing the Color System

Remote control unit
OPERATE
COMPUTER VIDEO
VOL.
FOCUS
MENU/ENTER
PAGE
BACK
PRESET
QUICK AV
ALIGN. MUTING
PAGE BACK button
Main menu
V I D E O
P I X E L C L O C K
P O S I T I O N
P I C T U R E
S O U N D
O P T I O N S
S O U R C E
D E C O D E R A U T O ( N T S C ( 4 8 0 i ) )
L A N G U A G E
E N G L I S H
Color system (DECODER) display
Note
• When computer-related signal is input, the display of the
color system is changed to gray color, making operation
impossible. When video signals from AV devices are input,
the item for the color system can be set.
AUTO is set for the color system when the projector is shipped from
the factory. Normally, use it in AUTO. If operation in AUTO is unstable
such as with color not being shown, set to a dedicated color system
in accordance with the color system of the signal being input.
MENU/ENTER
1
button
2
3
Cursor buttons
N T S C ( 4 8 0 i )
Memo
About automatic signal identification
• AUTO is selected when shipped from the factory. In AUTO, the color system
(DECODER) of the signal being input is automatically identified and indicated
in ( ). Refer to the main menu display.
• If operation in AUTO is unstable such as with color not being shown, set to a
dedicated color system in accordance with the color system of the signal
being input. When the dedicated color system is set, be careful as automatic
identification does not work.
¶ To finish the main menu, press the PAGE BACK
Press the MENU/ENTER button.
• The main menu is shown on the screen.
Select "DECODER" with the cursor
button 5 or ∞.
• The selected item (displayed in text) is shown in magenta color
on the screen.
Set the color system with the cursor
button 2 or 3.
• Each time you press the cursor button 2 or 3, the color system
changes as follows.
3 : Forward / 2 : Backward
AUTO ................... Normally, set to AUTO. The color
NTSC(480i) .......... Dedicated to NTSC ( 480i ) .
NTSC4.43 ............ Dedicated to NTSC4.43.
PAL ...................... Dedicated to PAL.
SECAM ................ Dedicated to SECAM.
button.
system of a signal being input is
automatically identified.
35