Electrical Safety - Power Fist 8567356 Manuel D'utilisateur

V4.0
3 in. 3.5A Electric Cut·Off Tool 8567356
ELECTRICAL SAFETY
1. Disconnect power supply. Disconnect the tool from the power supply
when not in use, before cleaning, servicing or changing any parts.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces such as
pipes, radiators, cooking stoves and refrigerators. There is an
increased chance of electrical shock if your body is grounded.
3. Double insulated tools are equipped with a polarized plug (one blade
is wider than the other.) This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way. Double insulation
eliminates the need for a three wire grounded power cord and
grounded power supply system.
4. Grounded tools must be plugged into an outlet that is properly
installed and grounded in accordance with all codes and ordinances.
Never remove the grounding prong or modify the plug in any way. Do
not use any adapter plugs. Check with a qualified electrician if you are
in doubt as to whether the outlet is properly grounded. If the tool
should electronically malfunction or break down, grounding provides
a low resistance path to carry electricity away from the user.
5. Do not abuse the cord. Never use the cord to carry tools or pull the
plug from an outlet. Keep the cord away from heat, oil, sharp edges
or moving parts. Do not operate this tool if the power cord is frayed
or damaged. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock. Do not modify the plug in any way.
Visit www.princessauto.com for more information 7