Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8567356
3 in. 3.5A Electric Cut·Off Tool
V4.0
LUBRICATION
All bearings in this tool are lubricated with a sufficient amount of high
grade lubricant for the life of the tool under normal conditions. Therefore,
no further lubrication is required.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating
oil may act as a solvent that will break down the grease and cause the
tool to seize up.
STORAGE
When not in use for an extended period, store the tool in a cool dry place,
out of the reach of children.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified
technician service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
The tool will
Power supply is
Plug the tool into a
not operate.
incorrect for the tool's
120V 60Hz
electrical rating.
power supply.
Tool is not properly
Ensure that the tool's
attached to the
power cord is
power supply.
connected securely to
the power supply and
that the cord is not
damaged in anyway.
20
For technical questions call1·800-665-8685
Publicité
Table des Matières
