Power Fist 8567356 Manuel D'utilisateur page 14

8567356 3 in. 3.5A Electric Cut-Off Tool
ASSEMBLY
INSTALLING THE GUARD
Warning! The guard must be installed
and properly positioned before
installing a cutting disc or operating
the tool.
1. Pull the guard locking lever (1)
outward from its locked position.
2. Slide the guard mounting clamp (2)
over the guard mount (3) on
the tool. (See figure 1)
NOTE: Place the detent (4) so it will
slide over the slot (5) in the
guard mount.
3. When the guard clamp is fully slid
onto the guard mount, rotate the
guard 180° so it is position at the
top of the tool. (See figure 2)
4. Press the guard clamping lever
firmly inward toward the clamp to
lock the clamp onto the tool.
Fig.2
V4.0
Fig.l
14 For technical questions call1-800-665-8685