Chicco KeyFit 30 Mode D'emploi page 42

INSTALL USING LAP-SHOULDER BELT
While holding the shoulder belt tight, slide the shoulder belt strap
4
firmly into Shoulder Belt Lock-Off. Always use the Lock-Off on the
opposite side of where the vehicle seat belt is buckled.
This could damage the Lock-Off and/or the vehicle belt
CHECK YOUR WORK

Hold Base at each side and pull side to side and forward. Base should not
move more than 25 mm (1 inch) from vehicle seat back or side-to-side.

Check installation before every use!

Make sure bubble falls between the arrows on the bubble level indicator.
40
Do NOT pull on shoulder belt after it is positioned in Lock-Off.
Install Child Restraint:
• Installation continued on page 46.