Chicco KeyFit 30 Mode D'emploi page 13

Masquer les pouces Voir aussi pour KeyFit 30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• BEFORE each use, ALWAYS check to make sure restraint is tightly secured in the vehicle seat.
• NEVER use Child Restraint in a vehicle seating position where it cannot be secured tightly. A loosely
installed child restraint will not protect your child in a crash.
• Never leave carrier or base unsecured in your vehicle even when it is unoccupied. It could injure other
occupants in a sharp turn, sudden stop or crash.
• DO NOT install this child restraint using an inflatable seat belt. The interaction of the inflatable portion
of the vehicle's belt with this child restraint can result in serious injury or death. Install using UAS
instead, or move the car seat to a position with a suitable seat belt type.
• To prevent ejection or breathing difficulties, proper recline is required. When installing the Child
Restraint, check the bubble level on the base. Refer to pages 26-27 to make sure your child meets the
requirements.
• Make sure nothing interferes with carrier attachment to base. ALWAYS check attachment.
• ONLY use Chicco KeyFit/KeyFit 30 infant carriers with KeyFit/KeyFit 30 bases.
• DO NOT use Chicco KeyFit/KeyFit 30 infant carriers with Chicco Fit 2 bases.
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
11

Publicité

Table des Matières
loading

Table des Matières