Chicco KeyFit 30 Mode D'emploi page 64

Masquer les pouces Voir aussi pour KeyFit 30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADJUSTING HARNESS HEIGHT
Pull Harness Strap out through the front of the Carrier. Then re-thread
3
the Harness Strap through the desired Harness Strap Adjustment Slot.
4
Re-attach Harness Strap to the Splitter Plate. Repeat steps 1-4 of
Adjusting Harness Height for the other Harness Strap. Make sure
both Harness Straps are at positioned at the same height, as shown.
WARNING - Make sure Harness Straps are NOT twisted and
both Harness Straps are securely attached to the Splitter Plate.
62

Publicité

Table des Matières
loading

Table des Matières