Installation Options - Chicco KeyFit 30 Mode D'emploi

INSTALL WITH BASE SETUP
Infants may have difficulty breathing when in a sitting position.
Make sure the seat is reclined properly so that your child's head does
not fall forward. Failure to properly recline the Child Restraint
could increase the child's risk of serious injury or death.
1
L EVEL
2 Locate the Bubble Level Indicator and adjust the Recline Foot by pushing in on
both Foot Adjuster buttons and lifting or lowering the base until the Bubble
falls between the arrows on the Bubble Level Indicator (2b).
28
See page 16 for "Vehicle Seating Positions" before installing. Make
sure the vehicle is on a level surface. Place Base on selected vehicle
seat. Make sure it is not blocking the vehicle seat belt buckle.

Installation Options:

• UAS installation continued on page 30.
• Lap-Shoulder Belt installation continued on page 36.
• Lap Belt Only installation continued on page 42.