Troubleshooting - cosori CO137-AF Manuel

Masquer les pouces Voir aussi pour CO137-AF:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN

TROUBLESHOOTING

Problem
The air fryer will not
turn on.
Foods are not
completely cooked.
Foods are cooked
unevenly.
Foods are not crispy
after air frying.
French fries are not
cooked correctly.
Baskets will not slide
into the air fryer
securely.
White smoke is coming
out of the air fryer.
Dark smoke is coming
out of the air fryer.
The air fryer has a
plastic smell.
If your problem is not listed, please contact Customer Support (see page 21).
20
Make sure the air fryer is plugged in.
Push the baskets securely into the air fryer.
Place smaller batches of food items into the inner basket. If the
basket is overstuffed, then foods will be undercooked.
Increase cooking temperature or time.
Foods that are stacked on top of each other or close to each
other need to be shaken or flipped during cooking (see Shaking
Food, page 17).
Spraying or brushing a small amount of oil on foods can
increase crispiness (see Cooking Guide, page 18).
See French Fries, page 18.
Make sure the inner basket is not overfilled with food.
Make sure the inner basket is securely inside the outer basket.
The air fryer may produce some white smoke when you use it
for the first time. This is normal.
Make sure the baskets and the inside of the air fryer are cleaned
properly and not greasy.
Cooking greasy foods will cause oil to leak into the outer basket.
This oil will produce white smoke, and the baskets may be
hotter than usual. This is normal, and should not affect cooking.
Handle baskets with care.
Immediately unplug your air fryer. Dark smoke means that food
is burning or there is a circuit problem. Wait for smoke to clear
before pulling the baskets out. If the cause was not burnt food,
contact Customer Support (page 21).
Any air fryer may have a plastic smell from the manufacturing
process. This is normal. Follow the instructions for a Test Run
(page 14) to get rid of the plastic smell. If a plastic smell is still
present, please contact Customer Support (see page 21).
Possible Solution

Publicité

Table des Matières
loading

Table des Matières