Troubleshooting - cosori CP137-AF Mode D'emploi

Masquer les pouces Voir aussi pour CP137-AF:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

Problem
The air fryer will not turn on.
Foods are not completely
cooked.
Foods are cooked unevenly.
Foods are not crispy after air
frying.
French fries are not fried
correctly.
Baskets will not slide into the
air fryer securely.
White smoke is coming out of
the air fryer.
Dark smoke is coming out of
the air fryer.
Display shows Error Code "E1".
Display shows Error Code "E2".
Possible Solution
Make sure the air fryer is plugged in.
Push the baskets securely into the air fryer.
Place smaller batches of ingredients into the inner
basket. If the basket is overstuffed, then ingredients will
be undercooked.
Increase cooking temperature or time.
Ingredients that are stacked on top of each other or close
to each other need to be shaken during cooking (see
Shaking Food, page 13).
Spraying or brushing a small amount of oil on foods can
increase crispiness (see Cooking Guide, page 14).
See French Fries, page 14.
Make sure the basket is not overfilled with food.
Make sure the inner basket is securely inside the outer
basket.
The air fryer may produce some white smoke when you
use it for the first time. This is normal.
Make sure the pan is cleaned properly and not greasy.
Frying greasy foods will cause oil to leak into the outer
basket. This oil will produce white smoke, and the
baskets may be hotter than usual. This is normal, and
should not affect cooking. Handle baskets with care.
Immediately unplug your air fryer. Food is burning. Wait
for smoke to clear before pulling the baskets out.
There is a short circuit in the temperature monitor.
Contact Customer Support (page 18).
There is an open circuit in the temperature monitor.
Contact Customer Support (page 18).
EN
17

Publicité

Table des Matières
loading

Table des Matières