EN
Test Run
A test run will help you become familiar
with your air fryer, make sure it's working
correctly, and clean it of possible residues in
the process.
1. Make sure the air fryer baskets are empty
and plug in the air fryer.
2. Turn the temperature dial to 205°C.
3. Turn the timer dial past the 10 minute
mark until the power indicator turns on.
The power indicator and temperature
indicator will turn on, indicating the air
fryer is heating up. Then, turn it back to 5
minutes to begin preheating.
4. When the air fryer has finished
preheating, the temperature indicator
will turn off.
5. Pull out the baskets and let them cool for
5 minutes. Then, place the empty baskets
back in the air fryer.
6. Make sure the temperature dial is set to
205°C.
7. Turn the timer dial past the 10 minute
mark until the power indicator turns on.
Then, turn it back to 5 minutes. The air
fryer will start automatically.
8. The air fryer will chime when finished.
Pull out the baskets and let them cool
completely for 10–30 minutes.
14
Basket Tips
• Only separate the baskets to clean or after
cooking.
• The button guard protects the basket
release button from being pressed
accidentally. Slide the button guard
forward to press the basket release button.
• Never press the basket release button
while carrying the baskets.
• Only press the basket release button with
the baskets resting on a counter, or any
level, heat-resistant surface.
• The handle is attached to the inner basket,
not the outer basket. When you press the
basket release button, the outer basket will
drop.
Note:
• Do not unscrew the basket handle from the
baskets.
• To order accessories, please contact Customer
Support (see page 21).