Trouble Shooting - Parkside PSSA 18 A1 Traduction Des Instructions D'origine

GB IE

Trouble Shooting

Problem Possible cause
Battery (
Battery (
Appliance
Switch lock (
won't start
been operated properly
On/Off switch (
tive
Internal loose contact
Intermittent op-
On/Off switch (
eration
tive
Saw blade unsuitable
for the work piece to be
worked on
Saw blade blunt
Poor sawing
performance
Incorrect sawing speed
Low battery power
Saw blade unsuitable
for the work piece to be
Saw blade
worked on
quickly be-
Too much pressure applied
comes blunt
Sawing speed too high
20
All manuals and user guides at all-guides.com
11) discharged
11) not inserted
11) has not
7) defec-
7) defec-
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Switch on (see "Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Insert a suitable saw blade
Insert a new saw blade
Adjust sawing speed
Charge battery ( 11) (see "Charg-
ing process")
Insert a suitable saw blade (see "In-
stallation")
Reduce the pressure
Reduce the sawing speed