Cleaning/Maintenance; Cleaning & Maintenance; Cleaning; General Maintenance - Parkside PSSA 18 A1 Traduction Des Instructions D'origine

Scie sabre sans fil
Masquer les pouces Voir aussi pour PSSA 18 A1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
IE

Cleaning/Maintenance

Remove the battery from the
device before carrying out
any work or transporting it.
If the device is switched on
accidentally, there is a dan-
ger of injury.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
Always wear protective gloves
when handling the saw blade in
order to avoid cutting yourself.
The following cleaning and servicing
should be done regularly. This will ensure a
long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the appliance.
Clean the saw blade holder with a
brush or by blowing out with com-
pressed air. To do this, remove the saw
blade from the device.

General maintenance

Prior to every use, check the appliance
for obvious defects such as loose, worn
16
All manuals and user guides at all-guides.com

Storage

Waste Disposal/
Environmental Protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
or damaged parts.
Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Replace a blunt or bent blade or one
which has been damaged in some
other way.
Store the device in a dry place well out
of reach of children.
Remove the battery before storing the
unit for longer periods of time (e.g. hi-
bernation).
Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % over a longer stor-
age period (two LED lights of the char-
ge status indicator (
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
In order to keep the battery well
charged, avoid exposing the appliance
to extreme heat or cold in storage.
Store the equipment between 10° C
and 25° C. During storage, avoid ex-
treme cold or heat so the battery does
not lose power.
Machines do not belong with do-
mestic waste.
11a) light up).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

104447

Table des Matières